new version of eMaxMobileApp 1.74 for iOS and Android released

The latest eMaxMobileApp version 1.74 for iOS and Android is ready for download in Apple AppStore and Google PlayStore.

This version now supports the newly released motor firmware versions:

4.5.0 for the DU-E5000, DU-E5080 and DU-E5080-H drive units

4.8.0 for the DU-E6000, DU-E6110, DU-E6100-CRG and DU-E6180 drive units

4.8.0 for the DU-E7000 drive unit

4.10.0 for the DU-E8000 and DU-E8080 drive units

4.2.0 for the DU-EP800 (EP8), DU-EP800-RS (EP8-RS) and DU-EP800-CRG (EP8-CRG)drive units

4.2.2 for the DU-EP801 (EP801), DU-EP801-RS (EP801-RS) and DU-EP801-CRG (EP801-CRG) drive units

4.2.2 for the DU-EP600 (EP6), DU-EP600-RS (EP6-RS) and DU-EP600-CRG (EP6-CRG) drive units

TAKE CARE: Although this version of eMaxMobileApp is partially compatible with all the latest motor firmware versions of all drive units, it is NOT possible to change bike settings in order to increase max. motor support speed via Bluetooth!

See also this document.

If you want to speed up your bike with the latest motor firmware versions, you can use the latest version of our Windows based miniMax program in combination with a PCE interface or you can downgrade to a previous motor firmware (see documents in the support section).

Also with this new version especially the optimizing possibilities for the new generation drive units EP801 (DU-EP801) and EP6 (DU-EP6) and its variants RS (for Orbea) and CRG (cargo) have been improved and enhanced.

Now max. torque and max. peak power settings could be changed on the new motor types EP801 and EP6 already in the licence key free version. This could be a great advantage on the reduced “RS” motor versions which are used in the new Orbea bikes. See also this German forum post of us.

We also already have developed perfect possibilities to increase the max. motor support speed of these new generation drive units, see this German forum post of us.

With a cable bound SM-PCE02 interface and the latest verion of our Windows based miniMax – program you now can speed up your EP801 or EP6 based bike by yourself, see here.

We flawlessly have optimized a lot of bikes with these new generation drive units via personal service already.

So, if you are interested in optimizing your EP801 or EP6 based bike (or any other Shimano STePS based bike), just send an email to us and we will assist you.

new version 2.51 of miniMax released

Today we have released the new version 2.51 of our Windows based miniMax program. You can download the program free of charge from the eMax-Tuning website.

With this new version the newly released firmware versions

4.5.0 for DU-E50X0 (DU-E5000, DU-E5080),

4.10.0 for DU-E80X0 (DU-E8000, DU-E8080),

4.8.0 for DU-E7000 and DU-E61X0 (DU-E6100, DU-E6100-CRG, DU-E6110, DU-E6180) as well as

4.2.0 for DU-EP800, DU-EP800-RS, DUEP800-CRG

could be optimized in the well known ways (e.g. changing destination settings or wheel circumference) with a cable bound PCE – interface.

With this version it is also possible to optimize a DU-EP801 “EP801” or DU-EP600 “EP6” (or the associated “RS” or “CRG” version) based bike with an associated license key to a maximum speed of up to 50km/h (64km/h on an original US – drive unit) with correct indication of all values on the bike display by yourself.

In order to optimize the bike, it will no longer be necessary to remotely control your Windows computer over the Internet by us in the future.
However, for this type of optimization it is necessary that the required SM-PCE02 is connected directly to the drive unit, see also this document.

If it seems difficult to get direct access to the connections of the drive unit on your EP801 or EP6 based bike because, e.g. the bike frame covers the upper left part of the drive unit with the connections and the motor would first have to be removed or lowered to get access, we still also offer a personal optimization of the bike via an Internet based remote-control session of your computer, for which the cable-bound SM-PCE02 interface can be easily connected to the display (SC-EN600, SC-EN610, SC-EM800) or the left-hand control unit (SW-EN600-L) of the bike.

If you are interested in further information, feel free to contact us via email.

In general, you will find all optimization options that can be carried out with our eMax.tuning software in this document.

new version 2.50 of miniMax released

Today we have released the new version 2.50 of our Windows based miniMax program. You can download the program free of charge from the eMax-Tuning website.

With this version it is possible to optimize a DU-EP801 “EP801” or DU-EP600 “EP6” (or the associated “RS” or “CRG” version) based bike with an associated license key to a maximum speed of up to 50km/h (64km/h on an original US – drive unit) with correct indication of all values on the bike display by yourself.

In order to optimize the bike, it will no longer be necessary to remotely control your Windows computer over the Internet by us in the future.
However, for this type of optimization it is necessary that the required SM-PCE02 is connected directly to the drive unit, see also this document.

If it seems difficult to get direct access to the connections of the drive unit on your EP801 or EP6 based bike because, e.g. the bike frame covers the upper left part of the drive unit with the connections and the motor would first have to be removed or lowered to get access, we still also offer a personal optimization of the bike via an Internet based remote-control session of your computer, for which the cable-bound SM-PCE02 interface can be easily connected to the display (SC-EN600, SC-EN610, SC-EM800) or the left-hand control unit (SW-EN600-L) of the bike.

If you are interested in further information, feel free to contact us via email.

In general, you will find all optimization options that can be carried out with our eMax.tuning software in this document.

new version of eMaxMobileApp 1.73 for iOS and Android released

The latest eMaxMobileApp version 1.73 for iOS and Android is ready for download in Apple AppStore and Google PlayStore.

This version now supports the newly released motor firmware versions:

4.4.10 for the DU-E5000, DU-E5080 and DU-E5080-H drive units

4.7.7 for the DU-E6000, DU-E6110, DU-E6100-CRG and DU-E6180 drive units

4.7.7 for the DU-E7000 drive unit

4.9.5 for the DU-E8000 and DU-E8080 drive units

4.1.11 for the DU-EP800 (EP8), DU-EP800-RS (EP8-RS) and DU-EP800-CRG (EP8-CRG)drive units

4.2.2 for the DU-EP801 (EP801), DU-EP801-RS (EP801-RS) and DU-EP801-CRG (EP801-CRG) drive units

4.2.2 for the DU-EP600 (EP6), DU-EP600-RS (EP6-RS) and DU-EP600-CRG (EP6-CRG) drive units

TAKE CARE: Although this version of eMaxMobileApp is partially compatible with all the latest motor firmware versions of all drive units, it is NOT possible to change bike settings in order to increase max. motor support speed via Bluetooth!

See also here.

If you want to speed up your bike with the latest motor firmware versions, you can use the latest version of our Windows based miniMax program in combination with a PCE interface or you can downgrade to a previous motor firmware (see documents in the support section).

Also with this new version especially the optimizing possibilities for the new generation drive units EP801 (DU-EP801) and EP6 (DU-EP6) and its variants RS (for Orbea) and CRG (cargo) have been improved and enhanced.

Now max. torque and max. peak power settings could be changed on the new motor types EP801 and EP6 already in the licence key free version. This could be a great advantage on the reduced “RS” motor versions which are used in the new Orbea bikes. See also this German forum post of us.

We also already have found possibilities to increase the max. motor support speed of these new generation drive units, see this German forum post of us.

We are working very hard to provide this functionality also in our software soon and are already in the final testing phase.

We flawlessly have optimized a lot of bikes with these new generation drive units via personal service already.

So, if you are interested in optimizing your EP801 or EP6 based bike (or any other Shimano STePS based bike), just send an email to us and we will assist you.

new version 2.46 of miniMax released

Today we have released the new version 2.46 of our Windows based miniMax program. You can download the program free of charge from the eMax-Tuning website.

This version partially supports the latest motor firmware version 4.2.2 for EP801 and EP6.

With this version it is possible to add 30 additional licence keys in a separate dialog window. In this way you don´t have to enter the related licence key each time again if you are changing between different connected bikes.

We also have found possibilities to increase the max. motor support speed of these new generation drive units EP801 (DU-EP801) and EP6 (DU-EP600) and its “RS” (Orbea) and “CRG” (Cargo) variants, see this German forum post of us.

We are working very hard to provide this functionality also in our software soon and are already in the final testing phase.

We flawlessly have optimized a lot of bikes with these new generation drive units via personal service (also possible via internet remote control) already.

So, if you are interested in optimizing your EP801 or EP6 based bike (or any other Shimano STePS based bike), just send an email to us and we will assist you.

new version of eMaxMobileApp 1.72 for iOS and Android released

The latest eMaxMobileApp version 1.72 for iOS and Android is ready for download in Apple AppStore and Google PlayStore.

This version now supports the newly released motor firmware versions:

4.4.10 for the DU-E5000, DU-E5080 and DU-E5080-H drive units

4.7.7 for the DU-E6000, DU-E6110, DU-E6100-CRG and DU-E6180 drive units

4.7.7 for the DU-E7000 drive unit

4.9.5 for the DU-E8000 and DU-E8080 drive units

4.1.11 for the DU-EP800 (EP8), DU-EP800-RS (EP8-RS) and DU-EP800-CRG (EP8-CRG)drive units

4.2.1 for the DU-EP801 (EP801), DU-EP801-RS (EP801-RS) and DU-EP801-CRG (EP801-CRG) drive units

4.2.1 for the DU-EP600 (EP6), DU-EP600-RS (EP6-RS) and DU-EP600-CRG (EP6-CRG) drive units

TAKE CARE: Although this version of eMaxMobileApp is partially compatible with all the latest motor firmware versions of all drive units, it is NOT possible to change bike settings in order to increase max. motor support speed via Bluetooth!

See also here.

If you want to speed up your bike with the latest motor firmware versions, you can use the latest version of our Windows based miniMax program in combination with a PCE interface or you can downgrade to a previous motor firmware (see documents in the support section).

Also with this new version especially the optimizing possibilities for the new generation drive units EP801 (DU-EP801) and EP6 (DU-EP6) and its variants RS (for Orbea) and CRG (cargo) have been improved and enhanced.

Now max. torque and max. peak power settings could be changed on the new motor types EP801 and EP6 already in the licence key free version. This could be a great advantage on the reduced “RS” motor versions which are used in the new Orbea bikes. See also this German forum post of us.

We also already have found possibilities to increase the max. motor support speed of these new generation drive units, see this German forum post of us.

We are working very hard to provide this functionality also in our software soon and are already in the final testing phase.

We flawlessly have optimized a lot of bikes with these new generation drive units via personal service already.

So, if you are interested in optimizing your EP801 or EP6 based bike (or any other Shimano STePS based bike), just send an email to us and we will assist you.

new version 2.45 of miniMax released

Today we have released the new version 2.45 of our Windows based miniMax program. You can download the program free of charge from the eMax-Tuning website.

This version partially supports the latest motor firmware version 4.2.1 for EP801 and EP6.

With this version it is possible to add 30 additional licence keys in a separate dialog window. In this way you don´t have to enter the related licence key each time again if you are changing between different connected bikes.

We also have found possibilities to increase the max. motor support speed of these new generation drive units EP801 (DU-EP801) and EP6 (DU-EP600) and its “RS” (Orbea) and “CRG” (Cargo) variants, see this German forum post of us.

We are working very hard to provide this functionality also in our software soon and are already in the final testing phase.

We flawlessly have optimized a lot of bikes with these new generation drive units via personal service (also possible via internet remote control) already.

So, if you are interested in optimizing your EP801 or EP6 based bike (or any other Shimano STePS based bike), just send an email to us and we will assist you.

new version of eMaxMobileApp 1.71 for iOS and Android released

The latest eMaxMobileApp version 1.71 for iOS and Android is ready for download in Apple AppStore and Google PlayStore.

This version now supports the newly released motor firmware versions:

4.4.10 for the DU-E5000, DU-E5080 and DU-E5080-H drive units

4.7.7 for the DU-E6000, DU-E6110, DU-E6100-CRG and DU-E6180 drive units

4.7.7 for the DU-E7000 drive unit

4.9.5 for the DU-E8000 and DU-E8080 drive units

4.1.11 for the DU-EP800 (EP8), DU-EP800-RS (EP8-RS) and DU-EP800-CRG (EP8-CRG)drive units

4.2.0 for the DU-EP801 (EP801), DU-EP801-RS (EP801-RS) and DU-EP801-CRG (EP801-CRG) drive units

4.2.0 for the DU-EP600 (EP6), DU-EP600-RS (EP6-RS) and DU-EP600-CRG (EP6-CRG) drive units

TAKE CARE: Although this version of eMaxMobileApp is partially compatible with all the latest motor firmware versions of all drive units, it is NOT possible to change bike settings in order to increase max. motor support speed via Bluetooth!

See also here.

If you want to speed up your bike with the latest motor firmware versions, you can use the latest version of our Windows based miniMax program in combination with a PCE interface or you can downgrade to a previous motor firmware (see documents in the support section).

Also with this new version especially the optimizing possibilities for the new generation drive units EP801 (DU-EP801) and EP6 (DU-EP6) and its variants RS (for Orbea) and CRG (cargo) have been improved and enhanced.

Now max. torque and max. peak power settings could be changed on the new motor types EP801 and EP6 already in the licence key free version. This could be a great advantage on the reduced “RS” motor versions which are used in the new Orbea bikes. See also this German forum post of us.

We also already have found possibilities to increase the max. motor support speed of these new generation drive units, see this German forum post of us.

We are working very hard to provide this functionality also in our software soon and are already in the final testing phase.

We flawlessly have optimized a lot of bikes with these new generation drive units via personal service already.

So, if you are interested in optimizing your EP801 or EP6 based bike (or any other Shimano STePS based bike), just send an email to us and we will assist you.

new version 2.43 of miniMax released

Today we have released the new version 2.43 of our Windows based miniMax program. You can download the program free of charge from the eMax-Tuning website.

Some minor optimizations related to gear mode settings for EP801 and EP6 have been made.

With this version it is possible to add 30 additional licence keys in a separate dialog window. In this way you don´t have to enter the related licence key each time again if you are changing between different connected bikes.

We also have found possibilities to increase the max. motor support speed of these new generation drive units EP801 (DU-EP801) and EP6 (DU-EP600) and its “RS” (Orbea) and “CRG” (Cargo) variants, see this German forum post of us.

We are working very hard to provide this functionality also in our software soon.

We flawlessly have optimized a lot of bikes with these new generation drive units via personal service (also possible via internet remote control) already.

So, if you are interested in optimizing your EP801 or EP6 based bike (or any other Shimano STePS based bike), just send an email to us and we will assist you.

new version 2.42 of miniMax released

Today we have released the new version 2.42 of our Windows based miniMax program. You can download the program free of charge from the eMax-Tuning website.

With this version it is possible to add 30 additional licence keys in a separate dialog window. In this way you don´t have to enter the related licence key each time again if you are changing between different connected bikes.

We also have found possibilities to increase the max. motor support speed of these new generation drive units EP801 (DU-EP801) and EP6 (DU-EP600) and its “RS” (Orbea) and “CRG” (Cargo) variants, see this German forum post of us.

We are working very hard to provide this functionality also in our software soon.

We flawlessly have optimized a lot of bikes with these new generation drive units via personal service (also possible via internet remote control) already.

So, if you are interested in optimizing your EP801 or EP6 based bike (or any other Shimano STePS based bike), just send an email to us and we will assist you.